Posts

What is the charging and discharging principle of ternary lithium-ion battery?

Image
The full name of the ternary lithium-ion battery is the ternary polymer lithium battery . The ternary polymer lithium battery refers to the lithium battery whose positive electrode material uses nickel-cobalt lithium manganate (Li(NiCoMn)O2) ternary positive electrode material. The ternary composite positive electrode material Precursor products are made of nickel salt, cobalt salt, and manganese salt. The ratio of nickel, cobalt, and manganese can be adjusted according to actual needs. The battery with ternary materials as the positive electrode is safer than lithium cobalt oxide batteries. 1. Charging of ternary lithium-ion battery The highest end-of-charge voltage of a single lithium-ion battery is 4.2V, and it cannot be overcharged, otherwise the battery will be scrapped due to the loss of too much lithium ions in the positive electrode. When charging lithium-ion batteries, special constant-current and constant-voltage chargers should be used. First charge with consta...
Post a Comment
Read more

Precautions for charging, maintaining and using lithium batteries of lithium electric vehicles

Image
The number of kilometers that a lithium battery electric vehicle can run on a full charge is mainly related to the capacity of the lithium battery configured, and also has something to do with the method of use and the quality of the lithium battery. Let's learn more about the lithium battery charging instructions, maintenance and use precautions of lithium electric vehicles! Lithium electric vehicle charging instructions 1. Place and recharge: the battery pack has some remaining power before leaving the factory, and it can also be used for short-distance riding after the electric bike is sold. After the first ride, the battery must be charged for the first time, and it is recommended that the first charge should take a little longer (8-12 hours). The battery pack should be charged in time after use and cannot be stored at a loss of power. If the battery has not been used for more than two months, the battery pack needs to be fully charged once. If the battery pack...
Post a Comment
Read more

What are the requirements for lithium-ion batteries on cathode materials?

Image
The performance of the lithium-ion battery cathode material directly affects the performance of the lithium-ion battery, and its cost also directly determines the cost of the battery. At present, the positive electrode materials that have been successfully developed and applied mainly include lithium cobalt oxide, lithium iron phosphate, lithium manganate, ternary materials nickel cobalt lithium manganate (NCM) and nickel cobalt lithium aluminate (NCA). The basic requirements of lithium-ion batteries for cathode materials: 1. The potential of the material itself is high, which can form a large potential difference with the negative electrode material, thereby realizing a battery design with high energy density; at the same time, the insertion and extraction of charged ions have little effect on the electrode potential, so the charging and discharging process will not Excessive voltage fluctuations occur without adversely affecting other electrical systems within the sys...
Post a Comment
Read more

What is the material of lithium battery separator?

Image
Lithium-ion battery separator , in the structure of lithium battery, the separator is one of the key inner components. For the lithium battery series, since the electrolyte is an organic solvent system, a diaphragm material resistant to organic solvents is required, and a high-strength thin-film polyolefin porous film is generally used. 1. Performance of lithium-ion battery separator products Since the performance of the lithium-ion battery separator determines the key characteristics of the lithium-ion battery, such as capacity, cycle performance , and charge-discharge current density, the separator is required to have appropriate thickness, ion transmission rate, pore size and porosity, and sufficient chemical stability. performance, thermal stability and mechanical stability. Lithium-ion battery separator has a large number of zigzag through micropores, which can ensure the free passage of electrolyte ions to form a charge-discharge circuit; when the battery is overch...
Post a Comment
Read more

How many years is the life of a ternary lithium battery?

Image
Ternary lithium battery, also known as ternary lithium polymer , refers to a lithium battery with nickel-cobalt manganate or nickel-cobalt aluminate as the positive electrode material. Ternary lithium batteries are widely used in new energy vehicles due to their smaller size, higher capacity density, and low temperature resistance. The service life of the ternary lithium battery is calculated according to the ratio of the capacity decay degree after use to a certain extent, and it will be terminated directly until the capacity life is zero. The industry algorithm is generally that the ternary lithium battery is fully charged and then discharged once, which is called the cycle life. The theoretical life of a lithium battery is 1200 times that of full charge and discharge, that is, the full cycle life . According to the frequency of use, charge and discharge once every three days, charge and discharge 120 times a year, and the service life of the ternary lithium battery reac...
Post a Comment
Read more